基于风险与效益模型的政府农业科技投入范围界定

在分析农业科技研发层次与演化流程的基础上,提出了不同研究阶段的农业技术类型和特征,构建了农业科技研发投入风险与效益模型,揭示了政府农业科技投入领域的选择行为,并以此界定了农业科技投入的合理范围。     

基于经济效益与生态效益的食用菌产业优化评价

为了优化食用菌产业结构,促进食用菌产业的可持续发展。给出了调整优化食用菌产业结构、促进食用菌产业生态经济建设的一些措施;提出重视经济效益和生态效益,合理引导发展中小食用菌企业的思路。对食用菌产业优化和生态经济的发展具有一定的参考价值。     

‘红国王’葡萄组织培养快速繁殖

为建立‘红国王’葡萄组培快繁体系,本试验研究了生长素、接种材料类型、培养条件对组培苗继代增殖与生根的影响。结果表明,0.5 mg/L IAA适合‘红国王’的继代增殖,繁殖系数为5.49,在培养基中附加0.3 mg/L NAA,愈伤组织少且根系粗壮;适合‘红国王’组培苗生长的蔗糖浓度为25~30 g/L,在该浓度下植株长势健壮,生根条数多;带半叶单芽茎段为‘红国王’适宜接种材料类型;接种后第1天至第10天暗培养,可促进‘红国王’根系发育;放置于LED灯复合光红∶蓝∶白=3∶1∶1下,可获得长势强、根系强壮的组培苗;继代间隔为40 d时,繁殖速度较快。     

舟山长白岛民俗文化探析

以长白岛为例,通过对长白岛民俗文化的现状分析,发现其存在的问题,由此提出保护和发展长白岛民俗文化的建议和措施,希望对长白岛的文化、经济、旅游业发展具有一定的借鉴意义.     

南京市PM10人群健康经济损失评估

基于2004 ～2013年南京市PM10浓度、人口资料及经济指标等数据,以死亡为慢性健康效应终点,选择相应的暴露-反应关系,采用修正的人力资本法进行经济损失评估.结果表明,2004 ～ 2013年南京市PM10污染呈波动增长的趋势,最高值出现在2013年,经济损失达106.06亿元,占当年GDP的1.32％.可见,目前南京市PM10长期污染造成的人群健康经济损失相当可观,亟需制定相关污染防治措施.     

不同能源类型密集烤房烘烤效果对比研究

[目的]探讨不同能源类型密集烤房的烘烤效果.[方法]2014年在云南大理进行了不同能源密集式烤房烘烤效果对比研究,通过试验分析了不同能源类型密集烤房在烘烤成本、经济效益及烤房温度控制等方面的烘烤效果.[结果]研究表明,最优处理为T2处理(25 kW内除湿热泵+20 kW电发热管辅助供热烤房),相比对照1 kg干烟可以减少烘烤成本1.28元,提高均价1.54元,中上等烟比例也有所提高,且烤房温度控制精准性好,其次是生物质燃烧机烤房和甲醇燃烧机烤房,但结合烤房的实际应用性,当前生物质燃烧机烤房最具推广价值.[结论]研究可为今后新能源烤房的开发与应用奠定基础.     

河南长江流域防护林工程水土保持效益评价

涵养水源和保育土壤是森林的主要生态功能。通过采用森林生态系统服务功能实物量、价值量评估方法对长防林工程实施区域森林的水土保持效益进行的评价,结果表明,长防林工程实施后林地可调节水量12.936亿m3,固土0.135亿t,林地的水土保持效益价值达126.247亿元。经过20年的长防林工程建设,项目区内森林资源快速增长,水土流失面积大幅度减少,工程建设对生态环境的改善起到了明显的作用。     

油葵不同灌溉模式对土壤水盐含量的影响及经济效益分析

通过研究油葵不同灌水方式对土壤水分、盐分含量的变化和经济效益比较,找出合理的灌溉模式,提高灌溉水利用率。试验设4个处理:不灌水(CK)、灌水1次(开花期)、灌水2次(开花期、灌浆期各一次)、灌水3次(现蕾期、开花期、灌浆期各一次),每次灌水量900 m3/hm~2,重复3次,随机区组排列。结果表明:灌水2次处理在降低0~20cm土层土壤盐分含量、p H方面效果最好;灌水2次处理显著提高了油葵产量和经济效益,分别比对照提高91%、117%。灌水2次处理模式有利于油葵正常生长发育,降低了土壤返盐,能抑制耕作层中盐分的表聚,显著地提高油葵产量和经济效益,是油葵最佳的灌溉模式。     

Survey of large circular and octagonal tanks operated at Norwegian commercial smolt and post-smolt sites

A survey was conducted to determine the geometry, operating parameters, and other key features of large circular or octagonal culture tanks used to produce Atlantic salmon smolt and post-smolt at six major Norwegian Atlantic salmon production companies. A total of 55 large tanks were reported at seven land-based hatchery locations, i.e., averaging 7.9 (range of 4–12) large tanks per land-based site. In addition, one 21,000 m³ floating fiberglass tank in sea was reported. Culture volume ranged from 500 to 1300 m³ for each land-based tank. Most tanks were circular, but one site used octagonal tanks. Land-based tank diameters ranged from 14.5 to 20 m diameter, whereas the floating tank was 40 m diameter. Maximum tank depths ranged from 3.5 to 4.5 m at land-based facilities, which produced diameter-to-average-depth ratios of 3.6:1 to 5.5:1 m:m. The floating tank was much deeper at 20 m, with a diameter-to-average-depth ratio of only 2.4:1 m:m. All land-based tanks had floors sloping at 4.0–6.5% toward the tank center and various pipe configurations that penetrated the culture tank water volume at tank center. These pipes and sloping floors were used to reduce labor when removing dead fish and harvesting fish.Maximum flow ranged from 3 to 19 m³/min per land-based tank, with 400 m³/min at the floating tank, but tank flow was adjustable at most facilities. Land-based tanks were flushed at a mean hydraulic retention time (HRT) of 35–170 min. Maximum feed load on each land-based tank ranged from 525 to 850 kg/day, but the floating tank reached 3700 kg/day. Almost half of the large tanks reported in this survey were installed or renovated since 2013, including the three tank systems with the highest flow rate per tank (greater than 17.6 m³/min). These more recent tanks were operated at more rapid tank HRT’s, i.e., from 34.8 to 52.5 min, than the 67–170 min HRT typical of the large tanks built before 2013. In addition, flow per unit of feed load in land-based tanks that began operating before 2010 were lower (19–30 m³ flow/kg feed) than in tanks that began operating later (33–40 m³ flow/kg feed). In comparison, the floating tank operates at a maximum daily tank flow to feed load of 160 m³ flow/kg feed, which is the least intensive of all tanks surveyed. Survey results suggest that the recently built tanks have been designed to operate at a reduced metabolic loading per unit of flow, a tendency that would improve water quality throughout the culture tank, all else equal. This trend is possible due to the ever increasing application of water recirculating systems.     

中山市资源节约型农业发展模式

本文以广东省中山市农业的发展为案例,定性分析了该地区发展节约型农业的模式,以及由此带来的经济效益、生态效益和社会效益。在对中山市农业进行科学评价的基础上,确定了该市节约型农业的主要发展模式为：节地模式的土地流转和提高耕地质量,节水模式的微灌,节肥模式的测土配方。